BLADE OS™ ISCLI Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 ISCLI Reference
224
 Chapter 4: Configuration Commands BMD00115, August 2009
Ethernet Filtering Configuration
These commands allow you to define Ethernet matching criteria for an ACL.
Table 121 Ethernet Filtering Configuration Commands
Command Syntax and Usage
[no] access-control list <1-762> ethernet source-mac-address
<MAC address> <MAC mask>
Defines the source MAC address for this ACL.
Command mode: Global configuration
[no] access-control list <1-762> ethernet destination-mac-address
<MAC address> <MAC mask>
Defines the destination MAC address for this ACL.
Command mode: Global configuration
[no] access-control list <1-762> ethernet vlan <VLAN ID> <VLAN mask>
Defines a VLAN number and mask for this ACL.
Command mode: Global configuration
[no] access-control list <1-762> ethernet ethernet-type
{arp|ip|ipv6|mpls|rarp|any|<other (0xXXXX)>}
Defines the Ethernet type for this ACL.
Command mode: Global configuration
[no] access-control list <1-762> ethernet priority <0-7>
Defines the Ethernet priority value for the ACL.
Command mode: Global configuration
default access-control list <1-762> ethernet
Resets Ethernet parameters for the ACL to their default values.
Command mode: Global configuration