BLADE OS™ ISCLI Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 ISCLI Reference
226
 Chapter 4: Configuration Commands BMD00115, August 2009
IPv4 Filtering Configuration
These commands allow you to define IPv4 matching criteria for an ACL.
Table 122 IP version 4 Filtering Configuration Commands
Command Syntax and Usage
[no] access-control list <1-762> ipv4 source-ip-address <IP address>
<IP mask>
Defines a source IP address for the ACL. If defined, traffic with this source IP address will
match this ACL. Specify an IP address in dotted decimal notation.
Command mode: Global configuration
[no] access-control list <1-762> ipv4 destination-ip-address
<IP address> <IP mask>
Defines a destination IP address for the ACL. If defined, traffic with this destination IP
address will match this ACL.
Command mode: Global configuration
[no] access-control list <1-762> ipv4 protocol <0-255>
Defines an IP protocol for the ACL. If defined, traffic from the specified protocol matches
this filter. Specify the protocol number. Listed below are some of the well-known protocols.
Number Name
1 icmp
2 igmp
6 tcp
17 udp
89 ospf
112 vrrp
Command mode: Global configuration
[no] access-control list <1-762> ipv4 type-of-service <0-255>
Defines a Type of Service (ToS) value for the ACL. For more information on ToS, refer to
RFC 1340 and 1349.
Command mode: Global configuration