BLADE OS™ ISCLI Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 ISCLI Reference
BMD00115, August 2009 Chapter 4: Configuration Commands
 235
Port Mirroring
Port mirroring is disabled by default. For more information about port mirroring on the switch, see
“Appendix A: Troubleshooting” in the BLADE OS 5.1 Application Guide.
Note – Traffic on VLAN 4095 is not mirrored to the uplink ports.
Port Mirroring commands are used to configure, enable, and disable the monitored port. When
enabled, network packets being sent and/or received on a target port are duplicated and sent to a
monitor port. By attaching a network analyzer to the monitor port, you can collect detailed
information about your network performance and usage.
Table 130 Port Mirroring Configuration Commands
Command Syntax and Usage
[no] port-mirroring enable
Enables or disables port mirroring.
Command mode: Global configuration
show port-mirroring
Displays current settings of the mirrored and monitoring ports.
Command mode: All except User EXEC