BLADE OS™ ISCLI Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 ISCLI Reference
242
 Chapter 4: Configuration Commands BMD00115, August 2009
802.1X Port Configuration
The 802.1X port commands allows you to configure parameters that affect the selected port in the
switch. These settings override the global 802.1X parameters.
Table 136 802.1X Port Commands
Command Syntax and Usage
dot1x mode force-unauthorized|auto|force-authorized
Sets the type of access control for the port:
 force-unauthorized - the port is unauthorized unconditionally.
 auto - the port is unauthorized until it is successfully authorized by the RADIUS server.
 force-authorized - the port is authorized unconditionally, allowing all traffic.
The default value is force-authorized.
Command mode: Interface port
dot1x quiet-time <0-65535>
Sets the time, in seconds, the authenticator waits before transmitting an EAP-Request/
Identity frame to the supplicant (client) after an authentication failure in the previous round of
authentication. The default value is 60 seconds.
Command mode: Interface port
dot1x transmit-interval <1-65535>
Sets the time, in seconds, the authenticator waits for an EAP-Response/Identity frame from
the supplicant (client) before retransmitting an EAP-Request/Identity frame. The default
value is 30 seconds.
Command mode: Interface port
dot1x supplicant-timeout <1-65535>
Sets the time, in seconds, the authenticator waits for an EAP-Response packet from the
supplicant (client) before retransmitting the EAP-Request packet from the authentication
server. The default value is 30 seconds.
Command mode: Interface port