BLADE OS™ ISCLI Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 ISCLI Reference
256
 Chapter 4: Configuration Commands BMD00115, August 2009
Static FDB Configuration
Use the following commands to configure static entries in the Forwarding Database (FDB).
Table 145 FDB configuration commands
Command Syntax and Usage
mac-address-table static <MAC address> <VLAN number> <port number>
Adds a permanent FDB entry. Enter the MAC address using the following format,
xx:xx:xx:xx:xx:xx
For example, 08:00:20:12:34:56
You can also enter the MAC address as follows:
xxxxxxxxxxxx
For example, 080020123456
Command mode: Global configuration
no mac-address-table static <MAC address> <VLAN number>
Deletes a permanent FDB entry.
Command mode: Global configuration
clear mac-address-table static all
Clears all static FDB entries.
Command mode: Global configuration
show mac-address-table
Display current FDB configuration.
Command mode: All except User EXEC