BLADE OS™ ISCLI Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 ISCLI Reference
BMD00115, August 2009 Chapter 4: Configuration Commands
 259
LLDP Port Configuration
Use the following commands to configure LLDP port options.
no lldp enable
Globally turns LLDP off.
Command mode: Global configuration
show lldp
Display current LLDP configuration.
Command mode: All
Table 148 LLDP port commands
Command Syntax and Usage
lldp admin-status {disabled|tx_only|rx_only|tx_rx}
Configures the LLDP transmission type for the port, as follows:
 Transmit only
 Receive only
 Transmit and receive
 Disabled
The default value is tx_rx.
Command mode: Interface port
[no] lldp trap-notification
Enables or disables SNMP trap notification for LLDP messages.
Command mode: Interface port
show interface port <port number> lldp
Display current LLDP port configuration.
Command mode: All
Table 147 LLDP commands
Command Syntax and Usage