BLADE OS™ ISCLI Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 ISCLI Reference
BMD00115, August 2009 Chapter 4: Configuration Commands
 263
IP Trunk Hash Configuration
Use the following commands to configure IP trunk hash settings for the switch. The trunk hash
settings affect both static trunks and LACP trunks.
Layer 2 IP Trunk Hash Configuration
Trunk hash parameters are set globally for the switch. You can enable one or two parameters, to
configure any of the following valid combinations:
 SMAC (source MAC only)
 DMAC (destination MAC only)
 SIP (source IP only)
 DIP (destination IP only)
 SIP + DIP (source IP and destination IP)
 SMAC + DMAC (source MAC and destination MAC)
Use the following commands to configure layer 2 IP trunk hash parameters for the switch.
Table 151 IP Trunk Hash commands
Command Syntax and Usage
show portchannel hash
Display current trunk hash configuration.
Command mode: All
Table 152 Layer 2 IP Trunk Hash commands
Command Syntax and Usage
portchannel hash source-mac-address
Enable trunk hashing on the source MAC.
Command mode: Global configuration
portchannel hash destination-mac-address
Enable trunk hashing on the destination MAC.
Command mode: Global configuration