BLADE OS™ ISCLI Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 ISCLI Reference
BMD00115, August 2009 Chapter 4: Configuration Commands
 265
Link Aggregation Control Protocol Configuration
Use the following commands to configure Link Aggregation Control Protocol (LACP) for the
switch.
Table 153 Link Aggregation Control Protocol Commands
Command Syntax and Usage
[default] lacp system-priority <1-65535>
Defines the priority value for the switch. Lower numbers provide higher priority. The default
value is 32768.
Command mode: Global configuration
[default] lacp timeout {short|long}
Defines the timeout period before invalidating LACP data from a remote partner. Choose
short (3 seconds) or long (90 seconds). The default value is long.
Note: It is recommended that you use a timeout value of long, to reduce LACPDU
processing. If your switch’s CPU utilization rate remains at 100% for periods of 90 seconds or
more, consider using static trunks instead of LACP.
Command mode: Global configuration
show lacp
Display current LACP configuration.
Command mode: All