BLADE OS™ ISCLI Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 ISCLI Reference
BMD00115, August 2009 Chapter 4: Configuration Commands
 267
Failover Configuration
Use these commands to configure Layer 2 Failover. For more information about Layer 2 Failover,
see “High Availability” in the BLADE OS Application Guide.
Table 155 Layer 2 Failover Configuration Commands
Command Syntax and Usage
failover vlan
Globally turns VLAN monitor on. When the VLAN Monitor is on, the switch automatically
disables only downlink ports that belong to the same VLAN as ports in the failover trigger.
The default value is off.
Command mode: Global configuration
no failover vlan
Globally turns VLAN monitor off. When the VLAN Monitor is on, the switch
automatically disables only downlink ports that belong to the same VLAN as ports in the
failover trigger. The default value is off.
Command mode: Global configuration
failover enable
Globally turns Layer 2 Failover on.
Command mode: Global configuration
no failover enable
Globally turns Layer 2 Failover off.
Command mode: Global configuration
show failover trigger
Displays current Layer 2 Failover parameters.
Command mode: All