Manualshelf

BLADE OS™ ISCLI Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

ManualsBrandsHP ManualsComputer AccessoriesHP GbE2c Layer 2/3 Ethernet Blade Switch
271272273274275276277278279280
BLADE OS 5.1 ISCLI Reference
274
Chapter 4: Configuration Commands BMD00115, August 2009
Hot Links Master Configuration
Use the following commands to configure the Hot Links Master interface.
Table 162 Hot Links Master Configuration Commands
Command Syntax and Usage
[no] hotlinks trigger <1-5> master port <port number>
Adds the selected port to the Hot Links Master interface. Enter zero (0) to clear the port.
Command mode: Global configuration
[no] hotlinks trigger <1-5> master portchannel
<trunk number>
Adds the selected trunk group to the Master interface. Enter 0 (zero) to clear the trunk group.
Command mode: Global configuration
[no] hotlinks trigger <1-5> master adminkey <0-65535>
Adds a LACP admin key to the Master interface. LACP trunks formed with this admin key
will be included in the Master interface. Enter 0 (zero) to clear the admin key.
Command mode: Global configuration
show hotlinks
Displays the current Hot Links settings.
Command mode: All