BLADE OS™ ISCLI Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 ISCLI Reference
BMD00115, August 2009 Chapter 4: Configuration Commands
 275
Hot Links Backup Configuration
Use the following commands to configure the Hot Links Backup interface.
Table 163 Hot Links Backup Configuration Commands
Command Syntax and Usage
[no] hotlinks trigger <1-5> backup port <port number>
Adds the selected port to the Hot Links Backup interface. Enter zero (0) to clear the port.
Command mode: Global configuration
[no] hotlinks trigger <1-5> backup portchannel
<trunk number>
Adds the selected trunk group to the Backup interface. Enter 0 (zero) to clear the trunk
group.
Command mode: Global configuration
[no] hotlinks trigger <1-5> backup adminkey <0-65535>
Adds a LACP admin key to the Backup interface. LACP trunks formed with this admin
key will be included in the Backup interface. Enter 0 (zero) to clear the admin key.
Command mode: Global configuration
show hotlinks
Displays the current Hot Links settings.
Command mode: All