BLADE OS™ ISCLI Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 ISCLI Reference
276
 Chapter 4: Configuration Commands BMD00115, August 2009
VLAN Configuration
These commands configure VLAN attributes, change the status of each VLAN, change the port
membership of each VLAN, and delete VLANs.
By default, VLAN 1 is the only VLAN configured on the switch. Downlink ports and uplink ports
are in VLAN 1 by default. Up to 1000 VLANs can be configured on the switch. VLAN 4095 is
reserved for switch management.
Table 164 VLAN Configuration Commands
Command Syntax and Usage
vlan <VLAN number>
Enter VLAN configuration mode.
Command mode: Global configuration
protocol-vlan <1-8>
Configures the Protocol-based VLAN (PVLAN).
Command mode: VLAN
name <1-32 characters>
Assigns a name to the VLAN or changes the existing name. The default VLAN name is the
first one.
Command mode: VLAN
stg <STG number>
Assigns a VLAN to a Spanning Tree Group.
Command mode: VLAN
member <port number>
Adds port(s) to the VLAN membership.
Command mode: VLAN
no member <port number>
Removes port(s) from this VLAN.
Command mode: VLAN