BLADE OS™ ISCLI Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 ISCLI Reference
280
 Chapter 4: Configuration Commands BMD00115, August 2009
Private VLAN Configuration
Use the following commands to configure Private VLAN.
Table 166 Private VLAN commands
Command Syntax and Usage
private-vlan type primary
Configures the VLAN type as a Primary VLAN.
A Private VLAN must have only one primary VLAN. The primary VLAN carries
unidirectional traffic to ports on the isolated VLAN or to community VLAN.
Command mode: VLAN
private-vlan type community
Configures the VLAN type as a community VLAN.
Community VLANs carry upstream traffic from host ports. A Private VLAN may have
multiple community VLANs.
Command mode: VLAN
private-vlan type isolated
Configures the VLAN type as an isolated VLAN.
The isolated VLAN carries unidirectional traffic from host ports. A Private VLAN may have
only one isolated VLAN.
Command mode: VLAN
no private-vlan type
Clears the private-VLAN type.
Command mode: VLAN
[no] private-vlan map [<2-4094>]
Configures Private VLAN mapping between a secondary VLAN and a primary VLAN. Enter
the primary VLAN ID. Secondary VLANs have the type defined as isolated or
community. Use the no form to remove the mapping between the secondary VLAN and the
primary VLAN.
Command mode: VLAN