BLADE OS™ ISCLI Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 ISCLI Reference
284
 Chapter 4: Configuration Commands BMD00115, August 2009
IP Interface Configuration
The switch supports up to 256 IP interfaces. Each IP interface represents the switch on an IP subnet
on your network. The Interface option is disabled by default.
Table 168 IP Interface Configuration Commands
Command Syntax and Usage
interface ip <interface number>
Enter IP interface mode.
Command mode: Global configuration
ip address <IP address> [<IP netmask>]
Configures the IP address of the switch interface, using dotted decimal notation.
Command mode: Interface IP
ip netmask <IP netmask>
Configures the IP subnet address mask for the interface, using dotted decimal notation.
Command mode: Interface IP
vlan <VLAN number>
Configures the VLAN number for this interface. Each interface can belong to one VLAN.
Command mode: Interface IP
[no] relay
Enables or disables the BOOTP relay on this interface. It is enabled by default.
Command mode: Interface IP
enable
Enables this IP interface.
Command mode: Interface IP
no enable
Disables this IP interface.
Command mode: Interface IP