BLADE OS™ ISCLI Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 ISCLI Reference
BMD00115, August 2009 Chapter 4: Configuration Commands
 291
Network Filter Configuration
Table 174 IP Network Filter Configuration Commands
Command Syntax and Usage
ip match-address <1-256> <IP address> <IP netmask>
Sets the starting IP address and IP Netmask for this filter to define the range of IP addresses
that will be accepted by the peer when the filter is enabled. The default address is 0.0.0.0
0.0.0.0
Command mode: Global configuration.
ip match-address <1-256> enable
Enables the Network Filter configuration.
Command mode: Global configuration
no ip match-address <1-256> enable
Disables the Network Filter configuration.
Command mode: Global configuration
no ip match-address <1-256>
Deletes the Network Filter configuration.
Command mode: Global configuration
show ip match-address [<1-256>]
Displays the current the Network Filter configuration.
Command mode: All except User EXEC