BLADE OS™ ISCLI Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 ISCLI Reference
BMD00115, August 2009 Chapter 4: Configuration Commands
 305
ip ospf retransmit-interval <1-3600>
Configures the retransmit interval in seconds.
Command mode: Interface IP
[no] ip ospf key <key string>
Sets the authentication key to clear the password.
Command mode: Interface IP
[no] ip ospf message-digest-key <1-255>
Assigns an MD5 key to the interface.
Command mode: Interface IP
[no] ip ospf passive-interface
Sets the interface as passive. On a passive interface, you can disable OSPF protocol
exchanges, but the router advertises the interface in its LSAs so that IP connectivity to the
attached network segment will be established.
Command mode: Interface IP
[no] ip ospf point-to-point
Sets the interface as point-to-point.
Command mode: Interface IP
ip ospf enable
Enables OSPF interface.
Command mode: Interface IP
no ip ospf enable
Disables OSPF interface.
Command mode: Interface IP
Table 183 OSPF Interface Configuration Commands
Command Syntax and Usage