BLADE OS™ ISCLI Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 ISCLI Reference
306
 Chapter 4: Configuration Commands BMD00115, August 2009
OSPF Virtual Link Configuration
no ip ospf
Deletes OSPF interface.
Command mode: Interface IP
show interface ip <interface number> ospf
Displays the current settings for OSPF interface.
Command mode: All
Table 184 OSPF Virtual Link Configuration Commands
Command Syntax and Usage
area-virtual-link <1-3> area <0-2>
Configures the OSPF area index for the virtual link.
Command mode: Router OSPF
area-virtual-link <1-3> hello-interval <1-65535>
area-virtual-link <1-3> hello-interval <1-65535ms>
Configures the authentication parameters of a hello packet, in seconds or milliseconds.
Command mode: Router OSPF
area-virtual-link <1-3> dead-interval <1-65535>
area-virtual-link <1-3> dead-interval <1-65535ms>
Configures the health parameters of a hello packet, in seconds or milliseconds. The default
value is 60 seconds.
Command mode: Router OSPF
area-virtual-link <1-3> transit-delay <1-3600>
Configures the delay in transit, in seconds. Default is one second.
Command mode: Router OSPF
area-virtual-link <1-3> retransmit-interval <1-3600>
Configures the retransmit interval, in seconds. Default is five seconds.
Command mode: Router OSPF
Table 183 OSPF Interface Configuration Commands
Command Syntax and Usage