BLADE OS™ ISCLI Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 ISCLI Reference
BMD00115, August 2009 Chapter 4: Configuration Commands
 315
IGMPv3 Configuration
Table 191 describes the commands used to configure IGMP version 3.
Table 190 IGMP version 3 Configuration Commands
Command Syntax and Usage
ip igmp snoop igmpv3 sources <1-64>
Configures the maximum number of IGMP multicast sources to snoop from within the group
record. Use this command to limit the number of IGMP sources to provide more refined
control.
Command mode: Global configuration
[no] ip igmp snoop igmpv3 v1v2
Enables or disables snooping on IGMP version 1 and version 2 reports. When disabled, the
switch drops IGMPv1 and IGMPv2 reports. The default value is enabled.
Command mode: Global configuration
[no] ip igmp snoop igmpv3 exclude
Enables or disables snooping on IGMPv3 Exclude Reports. When disabled, the switch
ignores Exclude Reports. The default value is enabled.
Command mode: Global configuration
ip igmp snoop igmpv3 enable
Enables IGMP version 3. The default value is enabled.
Command mode: Global configuration
no ip igmp snoop igmpv3 enable
Disables IGMP version 3.
Command mode: Global configuration
show ip igmp snoop igmpv3
Displays the current IGMP v3 Snooping configuration.
Command mode: All except User EXEC