BLADE OS™ ISCLI Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 ISCLI Reference
316
 Chapter 4: Configuration Commands BMD00115, August 2009
IGMP Static Multicast Router Configuration
Table 191 describes the commands used to configure a static multicast router.
Note – When you configure a static multicast router on a VLAN, the switch continues to learn
dynamic multicast routers on that VLAN.
Table 191 IGMP Static Multicast Router Configuration Commands
Command Syntax and Usage
ip igmp mrouter <port number> <VLAN number> <version (1-3)>
Selects a port/VLAN combination on which the static multicast router is connected, and
configures the IGMP version (1 or 2) of the multicast router.
Command mode: Global configuration
no ip igmp mrouter <port number> <VLAN number> <version (1-3)>
Removes a static multicast router from the selected port/VLAN combination.
Command mode: Global configuration
clear ip igmp mrouter
Clears all static multicast routers from the switch.
Command mode: Global configuration
show ip igmp mrouter
Displays the current IGMP Static Multicast Router parameters.
Command mode: All except User EXEC