BLADE OS™ ISCLI Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 ISCLI Reference
318
 Chapter 4: Configuration Commands BMD00115, August 2009
IGMP Filter Definition
Table 193 describes the commands used to define an IGMP filter.
Table 193 IGMP Filter Definition Commands
Command Syntax and Usage
ip igmp profile <1-16> range <IP address 1> <IP address 2>
Configures the range of IP multicast addresses for this filter.
Command mode: Global configuration
ip igmp profile <1-16> action {allow|deny}
Allows or denies multicast traffic for the IP multicast addresses specified.
Command mode: Global configuration
ip igmp profile <1-16> enable
Enables this IGMP filter.
Command mode: Global configuration
no ip igmp profile <1-16> enable
Disables this IGMP filter.
Command mode: Global configuration
no ip igmp profile <1-16>
Deletes this filter’s parameter definitions.
Command mode: Global configuration
show ip igmp profile <1-16>
Displays the current IGMP filter.
Command mode: All