BLADE OS™ ISCLI Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 ISCLI Reference
BMD00115, August 2009 Chapter 4: Configuration Commands
 321
Bootstrap Protocol Relay Configuration
The Bootstrap Protocol (BOOTP) Relay commands are used to allow hosts to obtain their
configurations from a Dynamic Host Configuration Protocol (DHCP) server. The BOOTP
configuration enables the switch to forward a client request for an IP address to two DHCP/BOOTP
servers with IP addresses that have been configured on the
switch.
BOOTP relay is turned off by default.
Table 196 Bootstrap Protocol Relay Configuration Commands
Command Syntax and Usage
[no] ip bootp-relay {server1|server2} <IP address>
Sets the IP address of the first or second BOOTP server.
Command mode: Global configuration
ip bootp-relay enable
Globally turns on BOOTP relay.
Command mode: Global configuration
no ip bootp-relay enable
Globally turns off BOOTP relay.
Command mode: Global configuration