BLADE OS™ ISCLI Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 ISCLI Reference
324
 Chapter 4: Configuration Commands BMD00115, August 2009
virtual-router <1-255> priority <1-254>
Defines the election priority bias for this virtual server. The priority value can be any integer
between 1 and 254. The default value is 100.
During the master router election process, the routing device with the highest virtual router
priority number wins. If there is a tie, the device with the highest IP interface address wins. If
this virtual router’s IP address is the same as the one used by the IP interface, the priority for
this virtual router will automatically be set to 255 (highest).
When priority tracking is used, this base priority value can be modified according to a number
of performance and operational criteria.
Command mode: Router VRRP
virtual-router <1-255> timers advertise <1-255>
Defines the time interval between VRRP master advertisements. This can be any integer
between 1 and 255 seconds. The default value is 1.
Command mode: Router VRRP
[no] virtual-router <1-255> preemption
Enables or disables master preemption. When enabled, if this virtual router is in backup mode
but has a higher priority than the current master, this virtual router will preempt the lower
priority master and assume control. Note that even when preemption is disabled, this
virtual router will always pre-empt any other master if this switch is the owner (the IP
interface address and virtual router addr are the same). By default, this option is enabled.
Command mode: Router VRRP
virtual-router <1-255> enable
Enables this virtual router.
Command mode: Router VRRP
no virtual-router <1-255> enable
Disables this virtual router.
Command mode: Router VRRP
Table 198 VRRP Virtual Router Configuration Commands
Command Syntax and Usage