BLADE OS™ ISCLI Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 ISCLI Reference
326
 Chapter 4: Configuration Commands BMD00115, August 2009
Table 199 VRRP Priority Tracking Configuration Commands
Command Syntax and Usage
[no] virtual-router <1-255> track virtual-routers
When enabled, the priority for this virtual router will be increased for each virtual router in
master mode on this switch. This is useful for making sure that traffic for any particular
client/server pairing are handled by the same switch, increasing routing and load balancing
efficiency. This command is disabled by default.
Command mode: Router VRRP
[no] virtual-router <1-255> track interfaces
When enabled, the priority for this virtual router will be increased for each other IP interface
active on this switch. An IP interface is considered active when there is at least one active port
on the same VLAN. This helps elect the virtual routers with the most available routes as the
master. This command is disabled by default.
Command mode: Router VRRP
[no] virtual-router <1-255> track ports
When enabled, the priority for this virtual router will be increased for each active port on the
same VLAN. A port is considered “active” if it has a link and is forwarding traffic. This helps
elect the virtual routers with the most available ports as the master. This command is disabled
by default.
Command mode: Router VRRP
show ip vrrp virtual-router <1-255> track
Displays the current configuration for priority tracking for this virtual router.
Command mode: All except User EXEC