BLADE OS™ ISCLI Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 ISCLI Reference
328
 Chapter 4: Configuration Commands BMD00115, August 2009
group advertisement <1-255>
Defines the time interval between VRRP master advertisements. This can be any integer
between 1 and 255 seconds. The default is 1.
Command mode: Router VRRP
[no] group preemption
Enables or disables master pre-emption. When enabled, if the virtual router group is in
backup mode but has a higher priority than the current master, this virtual router will pre-empt
the lower priority master and assume control. Note that even when preemption is disabled,
this virtual router will always pre-empt any other master if this switch is the owner (the IP
interface address and virtual router address are the same). By default, this option is enabled.
Command mode: Router VRRP
group enable
Enables the virtual router group.
Command mode: Router VRRP
no group enable
Disables the virtual router group.
Command mode: Router VRRP
no group
Deletes the virtual router group from the switch configuration.
Command mode: Router VRRP
show ip vrrp group
Displays the current configuration information for the virtual router group.
Command mode: All except User EXEC
Table 200 VRRP Virtual Router Group Configuration Commands
Command Syntax and Usage