BLADE OS™ ISCLI Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 ISCLI Reference
BMD00115, August 2009 Chapter 4: Configuration Commands
 333
ServerMobility™ Port Configuration Menu
The following table describes the Server Mobility Port menu options.
Table 205 ServerMobility Port Options (/cfg/l3/sm/port)
Command Syntax and Usage
ip server-mobility port {all|ext|svr|<port number>} enable
Configures ServerMobility ports, as follows:
 all: All interface ports
 ext: All external uplink ports
 svr: All downlink server ports
 <port number>: select port numbers
Command mode: Global configuration
no ip server-mobility port {all|ext|svr|<port number>} enable
Removes the port from the ServerMobility feature.
Command mode: Global configuration
ip server-mobility port {all|ext|svr|<port number>}
add-backup {<port number>}
Adds a backup port to the selected port.
Command mode: Global configuration
no ip server-mobility port {all|ext|svr|<port number>}
add-backup {<port number>}
Removes the backup port.
Command mode: Global configuration
[no] ip server-mobility port
{all|ext|svr|<port number>} filter
Enables or disables filtering DHCP request information on the port. When enabled, DHCP
requests from the server are filtered, so that the DHCP server receives only DHCP requests
from the switch.
Command mode: Global configuration
show ip server-mobility
Displays the current ServerMobility port settings.
Command mode: Global configuration