Manualshelf

BLADE OS™ ISCLI Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

ManualsBrandsHP ManualsComputer AccessoriesHP GbE2c Layer 2/3 Ethernet Blade Switch
331332333334335336337338339340
BLADE OS 5.1 ISCLI Reference
334
Chapter 4: Configuration Commands BMD00115, August 2009
IP Loopback Interface Configuration
An IP loopback interface is not connected to any physical port. A loopback interface is always
accessible over the network.
Table 206 IP Loopback Interface commands
Command Syntax and Usage
interface loopback <1-5>
Enter Interface loopback mode.
Command mode: Global configuration
no interface loopback <1-5>
Deletes the selected loopback interface.
Command mode: Global configuration
ip address <IP address>
Defines the loopback interface IP address.
Command mode: Interface loopback
ip netmask <subnet mask>
Defines the loopback interface subnet mask.
Command mode: Interface loopback
enable
Enables the loopback interface.
Command mode: Interface loopback
no enable
Disables the loopback interface.
Command mode: Interface loopback
show interface loopback <1-5>
Displays the current IP loopback interface parameters.