BLADE OS™ ISCLI Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 ISCLI Reference
340
 Chapter 4: Configuration Commands BMD00115, August 2009
SFD Link to Enable Configuration
The following table describes the SFD Link to Enable (LtE) Menu options. The LtE can consist of
only interconnect ports or a single trunk containing only interconnect ports.
sfd ltm adminkey <1-65535>
Adds an LACP admin key to the LtM. LACP trunks formed with this admin key will be
included in the SFD LtM.
no sfd ltm adminkey <1-65535>
Removes an LACP admin key from the LtM.
show sfd
Displays the current SFD configuration parameters.
Table 212 SFD Link to Enable commands
Command Syntax and Usage
sfd lte port <port number>
Adds a port to the LtE. Only interconnect ports are allowed in the LtE.
no sfd lte <port number>
Removes a port from the LtE.
sfd lte portchannel <trunk number>
Adds a trunk group to the LtE. The LtE trunk group can contain only interconnect ports.
no sfd lte portchannel <trunk number>
Removes a trunk group from the LtE.
sfd lte adminkey <1-65535>
Adds an LACP admin key to the LtE. LACP trunks formed with this admin key will be
included in the LtE.
Table 211 SFD Link to Monitor commands
Command Syntax and Usage