BLADE OS™ ISCLI Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 ISCLI Reference
356
 Chapter 7: Maintenance Commands BMD00115, August 2009
Forwarding Database Maintenance
The Forwarding Database commands can be used to view information and to delete a MAC address
from the forwarding database or to clear the entire forwarding database. This is helpful in
identifying problems associated with MAC address learning and packet forwarding decisions.
clear flash-dump
Clears dump information from flash memory.
Command mode: All except User EXEC
show tech-support
Dumps all switch information, statistics, and configuration. You can log the output (tsdmp)
into a file.
Command mode: All except User EXEC
copy tech-support tftp
Redirects the technical support dump (tsdmp) to an external TFTP server.
Command mode: All except User EXEC
copy tech-support ftp
Redirects the technical support dump (tsdmp) to an external FTP server.
Command mode: All except User EXEC
Table 219 FDB Manipulation Commands
Command Syntax and Usage
show mac-address-table address <MAC address>
Displays a single database entry by its MAC address. If not specified, you are prompted for
the MAC address of the device. Enter the MAC address using one of the following formats:
 xx:xx:xx:xx:xx:xx (such as 08:00:20:12:34:56)
 xxxxxxxxxxxx (such as 080020123456)
Command mode: All except User EXEC
Table 218 General Maintenance Commands
Command Syntax and Usage