BLADE OS™ ISCLI Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 ISCLI Reference

364

 Chapter 7: Maintenance Commands BMD00115, August 2009

The dump information is displayed on your screen and, if you have configured your communication

software to do so, captured to a file. If the dump region is empty, the following appears:

TFTP or FTP System Dump Put

Use these commands to put (save) the system dump to a TFTP or FTP server.

Note – If the TFTP/FTP server is running SunOS or the Solaris operating system, the specified

copy flash-dump tftp (or ftp) file must exist prior to executing the

copy flash-dump tftp command (or copy flash-dump tftp), and must be writable (set

with proper permission, and not locked by any application). The contents of the specified file will

be replaced with the current dump data.

To save dump information via TFTP, enter:

You are prompted for the TFTP server IP address or hostname, and the filename of the target dump

file.

To save dump information via FTP, enter:

You are prompted for the FTP server IP address or hostname, your username and password, and the

filename of the target dump file.

Clearing Dump Information

To clear dump information from flash memory, enter:

The switch clears the dump region of flash memory and displays the following message:

If the flash dump region is already clear, the switch displays the following message:

No FLASH dump available.

Router# copy flash-dump tftp

Router# copy flash-dump ftp <server filename>

Router# clear flash-dump

FLASH dump region cleared.

FLASH dump region is already clear.