BLADE OS™ ISCLI Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 ISCLI Reference
48
 Chapter 2: Information Commands BMD00115, August 2009
Show All FDB Information
The following command displays Forwarding Database information:
show mac-address-table
Command mode:
All
An address that is in the forwarding (FWD) state, means that it has been learned by the switch. When
in the trunking (TRK) state, the port field represents the trunk group number. If the state for the port
is listed as unknown (UNK), the MAC address has not yet been learned by the switch, but has only
been seen as a destination address.
When an address is in the unknown state, no outbound port is indicated, although ports which
reference the address as a destination will be listed under “Reference ports.”
Clearing Entries from the Forwarding Database
To clear the entire FDB, refer to “Forwarding Database Maintenance” on page 356.
MAC address VLAN Port Trnk State Permanent
----------------- ---- ---- ---- ----- ---------
00:04:38:90:54:18 1 21 FWD
00:09:6b:9b:01:5f 1 21 FWD
00:09:6b:ca:26:ef 4095 22 FWD
00:0f:06:ec:3b:00 4095 22 FWD
00:11:43:c4:79:83 1 21 FWD P