BLADE OS™ ISCLI Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 ISCLI Reference
74
 Chapter 2: Information Commands BMD00115, August 2009
IP Routing Information
Using the commands listed below, you can display all or a portion of the IP routes currently held in
the switch.
Table 34 Route Information Commands
Command Syntax and Usage
show ip route address <IP address>
Displays a single route by destination IP address.
Command mode: All
show ip route gateway <IP address>
Displays routes to a single gateway.
Command mode: All
show ip route type {indirect|direct|local|broadcast|martian|
multicast}
Displays routes of a single type.
Command mode: All
For a description of IP routing types, see Table 35 on page 75.
show ip route tag {fixed|static|addr|rip|ospf|broadcast|
martian|multicast}
Displays routes of a single tag.
Command mode: All
For a description of IP routing types, see Table 36 on page 76.
show ip route interface <interface number>
Displays routes on a single interface.
Command mode: All