BLADE OS™ ISCLI Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 ISCLI Reference
88
 Chapter 2: Information Commands BMD00115, August 2009
IP Information
The following command displays Layer 3 information:
show layer3 information
Command mode:
All
IP information includes:
 IP interface information: Interface number, IP address, subnet mask, broadcast address, VLAN
number, and operational status.
 Default gateway information: Metric for selecting which configured gateway to use, gateway
number, IP address, and health status
 Server Mobility settings
 IP forwarding settings, including the forwarding status of directed broadcasts, and the status of
ICMP re-directs
 Network filter settings
 Route map settings
IP information:
Interface information:
1: 20.200.27.2 255.255.255.0 200.200.27.255, vlan 1, DOWN
Reminder: Please make sure that ports are in VLAN 1 and have link.
256: 10.100.144.11 255.255.255.0 10.100.144.255, vlan 4095, up
Loopback interface information:
Default gateway information: metric strict
1: 20.200.27.1, vlan any, FAILED
4: 10.100.144.1, vlan 4095, up active
Current ServerMobility settings: OFF
ServerMobility Encoding Scheme: switch
ServerMobility ports: empty
DHCP request filtering enabled ports: empty
Relay on non-ServerMobility ports: Ena
Active-Backup ports:
Auto-Recovery: Disabled
Auto-Recovery Time: 5 seconds
Current IP forwarding settings: OFF, dirbr disabled, noicmprd disabled
Current network filter settings:
none
Current route map settings: