BLADE OS™ ISCLI Reference HP GbE2c L2/L3 Ethernet Blade Switch Version 5.1 Advanced Functionality Software

BLADE OS 5.1 ISCLI Reference
BMD00115, August 2009 Chapter 2: Information Commands
 99
Access Control List Information
The following command displays Access Control List (ACL) information:
show access-control list <ACL number>
Command mode:
All
Access Control List (ACL) information includes configuration settings for each ACL and ACL
Group.
Current ACL List information:
------------------------
Filter 4 profile:
Meter
- Set to disabled
- Set committed rate : 64
- Set max burst size : 32
Re-Mark
- Set use of TOS precedence to disabled
Egress Port : 24
Actions : Permit
Filter 100 profile:
Ethernet
- SMAC : 00:21:00:00:00:00/ff:ff:ff:ff:ff:ff
Meter
- Set to disabled
- Set committed rate : 64
- Set max burst size : 32
Re-Mark
- Set use of TOS precedence to disabled
Actions :
No ACL groups configured.
Table 47 ACL Parameter Descriptions
Parameter Description
Filter x profile Indicates the ACL number.
Meter Displays the ACL meter parameters.
Re-Mark Displays the ACL re-mark parameters.
Egress Port Displays the egress port configured for the ACL, if applicable.
Actions Displays the configured action for the ACL.