ATM Configuration and Troubleshooting Guide

Configuring EMS High Availability over ATM
Configuring EMS HA-ATM for Remote Recovery (Using MC/ServiceGuard)
Chapter 6134
elb1 1500 25.128.20.0 25.128.20.193 4 0 10 2 0
elb1 1500 25.128.20.0 25.128.20.194 4 0 10 2 0
atm1 9360 none none 0 0 0 0 0
ipb0* 9180 none none 0 0 0 0 0
elb0 1500 25.128.10.0 25.128.10.193 2 0 3 0 0
elb0 1500 25.128.10.0 25.128.10.194 2 0 3 0 0
elb0 1500 none none 0 0 0 0 0
The netstat -in display for HP-UX 10.20 on the adoptive system
after remote recovery occurs could look like this:
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll
...
atm0 9360 none none 0 0 0 0 0
ipa0* 9180 1.2.3.0 1.2.3.4 0 0 292324 0 0
ela0 1500 25.128.10.0 25.128.10.195 2 0 6 0 0
ela0 1500 25.128.10.0 25.128.10.194 2 0 6 0 0
ela1 1500 25.128.20.0 25.128.20.195 4 0 10 2 0
ela1 1500 25.128.20.0 25.128.20.194 4 0 10 2 0
atm1 9360 none none 0 0 0 0 0
ipb0* 9180 none none 0 0 0 0 0
elb0* 1500 none none 2 0 1 0 0
elb1 1500 none none 0 0 0 0 0
Running HP-UX 11.X, if el100 has failed and the IP addresses have
been transferred to el101, the netstat -in display after local
recovery occurs could look like this:
Name Mtu Network Address IpktsOpkts
...
el100 1500 none none 0 0
el201 1500 25.128.20.0 25.128.20.193 0 0
el201:1 1500 25.128.20.0 25.128.20.194 0 0
el101 1500 25.128.10.0 25.128.10.193 0 0
el101:1 1500 25.128.10.0 25.128.10.194 0 0
el200 1500 none none 0 0
The netstat -in display for HP-UX 11.X after remote recovery
occurs could look like this:
Name Mtu Network Address IpktsOpkts
...
el100 1500 25.128.10.0 25.128.10.195 0 0
el100:1 1500 25.128.10.0 25.128.10.194 0 0