ATM Configuration and Troubleshooting Guide

Migrating from the J2803B or J2498A ATM Adapters
Installing the New Adapter and Software - Summary
Chapter 8172
Installing the New Adapter and Software -
Summary
NOTE Details of installing ATM adapters are given in the installation
documentation provided with each adapter.
A summary of the steps for installing the new ATM adapter and the
software is as follows:
Step 1. Halt and power off the system.
Step 2. Remove the old adapter.
Step 3. Install the new adapter.
Step 4. Reboot the system.
Step 5. If you are also updating the ATM software, install the new ATM software
as described in “Installing the ATM Software” on page 7.