ATM Configuration and Troubleshooting Guide

Migrating from the J2803B or J2498A ATM Adapters
Checking for and Reconfiguring Unsupported Traffic Profiles
Chapter 8 173
Checking for and Reconfiguring Unsupported
Traffic Profiles
To check for unsupported traffice profiles and then reconfigure any, if
necessary, follow these steps:
Step 1. Use the following commands to see the configuration of the configured
VCs (the example is for card instance number 0):
atmmgr 0 show -v
This shows all the PVCs configured and all SVCs currently open.
atmconfig show -c 0
This shows traffic parameters configured for SVCs.
Step 2. Identify any VCs that are configured with traffic profiles that are not
supported on the new adapter and need to be modified.
The table below lists the supported VC traffic profiles for the ATM
adapters (discontinued adapters are not shown).
Table 8-2
Adapter Part
Number
SVC Traffic
Profiles
Supported
PVC Traffic
Profiles Supported
J2469A & J2499A ABR, UBR ABR, CBR, UBR
J3420B UBR, VBR UBR, VBR
J3573A ABR, UBR ABR, CBR, UBR
A5513A & A5515A ABR, UBR ABR, CBR, UBR
A5483A ABR, UBR ABR, CBR, UBR