ATM Configuration and Troubleshooting Guide

Installing and Configuring the ATM Software
Preparing for Configuration
Chapter 2 19
— For the K-Class servers, install the J2469A ATM adapter in the
I/O board, avoiding the core I/O.
— For the T600 servers, if you have multiple I/O boards, distribute
the ATM adapters in each I/O expansion board so that the
network load is balanced.
• HP-PCI bus.
— In the V-Class servers, each card cage connects to two PCI
buses—one half of the cage connects to one bus, and the other
half connects to the second bus. We recommend that only one
HP-PCI ATM/622 adapter be installed per bus. Note that, for
V-Class servers, only qualified Hewlett-Packard personnel can
install ATM adapters.