ATM Configuration and Troubleshooting Guide

Conﬁguring SVCs and PVCs

Planning Your VC Conﬁguration

Chapter 5 65

Creating a VC Matrix

Create a VC matrix for the conﬁguration you intend to set up with your

ATM equipment.

NOTE Hewlett-Packard strongly recommends that you create a VC matrix

before starting to conﬁgure SVCs and PVCs.

Sample Matrix In the example in Figure 5-1 below, each system is equipped with one

ATM-HSC 155 Mbit/s [+] adapter.

Figure 5-1 Conﬁguration for VC Matrix Example

Table 5-2 below shows the VC matrix for this conﬁguration.

ATM Switch

System A

System B

System C

A1 A2

ATM/155