ATM Configuration and Troubleshooting Guide

Configuring SVCs and PVCs
Configuring SVC Traffic Parameters
Chapter 5 75
Step 3. Select “Networking and Communications”.
Step 4. Select “Network Interface Cards”.
Step 5. Highlight the ATM adapter that you want to configure, and then choose
Configure from the “Actions” menu.
This opens the “Configure ATM Card” window, which lists all configured
interfaces for the ATM adapter.
Step 6. Highlightthe interfacethat you want to configure and select Define SVC
Traffic Parameters... from the “Actions” menu. This opens the
“Define SVC Traffic Parameters” window, which lists all SVCs.
Step 7. Highlight the SVC that you want to remove and select the Remove...
button.
Step 8. Select the OK button when you are finished.
The SVC traffic profile is removed from the list of defined SVC traffic
profiles. Any SVCs on the interface that are currently using the newly
removed SVC traffic profile continue to use it until they are closed and
reopened or you disable and re-enable the interface. However, disabling
and re-enabling the interface closes all SVCs currently using it.
Using the Command atmconfig
See the atmconfig(1M) man pages for more information about how to
delete an SVC traffic profile using the atmconfig delete command.