ATM Configuration and Troubleshooting Guide

Configuring SVCs and PVCs
Configuring PVCs
Chapter 5 77
ATM/AAL vc information table
VPI,VCIPMP Type Use SEL Dest.IP Address AAL
Index Status
--------------------------------------------------------------
---------------
0,5 No PVC Signaling 00 N/A 5
0 Up
0,16 No PVC ILMI 00 N/A 5
0 Up
0,50 No SVC LEC_to_LECS/LES 37 N/A 5
0 Up
0,66 Leaf SVC LEC_to_LECS/LES 37 N/A 5
1 Up
0,82 No SVC LEC_to_BUS 37 N/A 5
0 Up
0,97 Leaf SVC LEC_to_BUS 37 N/A 5
1 Up
0,126 No SVC LEC_to_LECS/LES 16 N/A 5
0 Up
0,130 Leaf SVC LEC_to_LECS/LES 16 N/A 5
1 Up
0,135 No SVC LEC_to_BUS 8025 16 N/A 5
0 Up
0,138 Leaf SVC LEC_to_BUS 8025 16 N/A 5
1 Up
0,142 No SVC Classical_IP 00 - 5
0 Up
0,197 No SVC LLC LEC, MPC 01 * 5
0 Up
0,198 No SVC LLC LEC, MPC 01 * 5
0 Up
NOTE The VCs indicated with the VPI/VCI values of 0,5 and 0,16 are
automatically created and are always displayed when you use this
command.
More information about checking PVCs is provided in Chapter 7,
“Getting Status Information with ATM Commands,” on page 141. For
more information about how to configure an ATM switch, see your switch
documentation.