HP AD278A and AD279A PCI Multiplexer Release Notes HP-UX 11i v3 (September 2009)

Table 1-3 Defects Fixed
Defect DescriptionDefect IDs
Incorrect 'what' strings for pci_mux1 B.11.31.0806 release.
Description
'What' on /usr/conf/mod/pci_mux1 was displaying incorrect string.
Fix
pci_mux1 has been modified to display the correct 'What' string for 0909
release.
QXCR1000901487
pmux_stty(1) reports the status of unsupported driver options.
Description
'pmux_stty -a' reports the status of unsupported options indicated below:
$ pmux_stty -a /dev/tty2a8 onstr \033[5i offstr \033[4i term ansi maxcps 100
maxchar 50 bufsize 100 -forcedcd -fastcook -altpin -fastbaud (4800) -printer
eia232 -rtspace -dtrpace -ctspace -dsrpace -dcdpace DTR- RTS- CTS- CD-
DSR- RI- startc = 0x11 stopc = 0x13 -aixon astartc = 0x0 astopc = 0x0 [...] None
of the above options are supported or documented in the HP-UX pci_mux1
driver.
Fix
pmux_stty(1) has been modified to display only supported options as
below:
$ pmux_stty -a
/dev/tty2a8 +ixon +ixany +xon
QXCR1000775017
Executing pmux_stty without any parameters should display help.
Description
Executing pmux_stty without any parameters should display help for all
the supported options.
Fix
pmux_stty(1) is modified to display help for all the supported operations
when it is executed with out any parameters.
QXCR1000923135
Interoperability Information and Installation Requirements
This section provides interoperability, software, and hardware requirements information for
installing the current version of the AD278A/AD279A PCI MUX product on HP-UX 11i v3.
Interoperability Information
The non-RoHS (A6748A/A6749A) adapters and RoHS (AD278A/AD279A) PCI MUX adapters
can coexist on a system. The RoHS adapters cannot be connected to non-RoHS cables, connectors,
or port modules. The RoHS cables, connectors, or port modules cannot be connected to non-RoHS
adapters.
For more information about non-RoHS (A6748A/A6749A) and RoHS (AD278A/AD279A) RJ-45
connectors pin-out information, see the HP AD278A and AD279A PCI Multiplexer Support
Guide.
Hardware Requirements
Table 1-4 lists the platforms that support AD278A/AD279A PCI MUX serial adapters on HP-UX
11i v3 systems.
Interoperability Information and Installation Requirements 7