HP AD278A and AD279A PCI Multiplexer Release Notes HP-UX 11iv2 and HP-UX 11iv3 (5900-3161, July 2013)

Table 5 AD278A/AD279A PCI MUX fixes for HP-UX 11.23 (continued)
Release VersionDefect DescriptionDefect ID
B.11.23.1202The PCI_MUX1 MTNOACTIVITY timeout displays time
in seconds instead of minutes.
This defect is fixed in the current release. Modified the
code to ensure that the PCI_MUX1 MTNOACTIVITY
time is displayed in minutes.
QXCR1001194093
B.11.23.1109The fastcook option is enabled by default.
This is resolved in the current release. The fastcook
option is removed from the HP-UX system. pmux_stty
utility and pci_mux driver do not support fastcook.
QXCR1001143754
B.11.23.1009HP-UX 11.31 the PCI MUX AD278 does not raise the
DTR on open().
The open system call on a pci_mux1 device does not
set the Data Terminal Ready (DTR) Signal on the RS232
serial port.
QXCR1001062160
B.11.23.1009select()on write for MUX AD278A never wake up.
The select system call fails to return writable pci_mux1
device files. Modified the pci_mux1 driver to fix this
defect.
QXCR1001069179
B.11.23.1003Executing pmux_stty without any parameters must
display help.
Modified the pmux_stty(1) command to display help
for all the supported operations when it is executed
without any parameters.
QXCR1000959666
B.11.23.1003Incorrect card name used in the information displayed
by pci_mux1 driver.
Modified the pci_mux1 driver code to display correct
card name.
QXCR1000773542
B.11.23.1003The pmux_stty(1) command reports the status of
unsupported driver options.
pmux_stty -a reports the status of unsupported
options indicated as follows:
$ pmux_stty -a /dev/tty2a8 onstr \033[5i
offstr \033[4i term ansi maxcps 100
maxchar 50 bufsize 100 -forcedcd
-fastcook -altpin -fastbaud (4800)
-printer eia232 -rtspace -dtrpace
-ctspace -dsrpace -dcdpace DTR- RTS-
CTS- CDDSR- RI- startc = 0x11 stopc =
0x13 -aixon astartc = 0x0 astopc = 0x0
[...]
None of these options are supported or documented
in the HP-UX pci_mux1 driver.
Modified pmux_stty(1) to display only supported
options as following:
$ pmux_stty -a
/dev/tty2a8 +ixon +ixany +xon
QXCR1000775006
NOTE: For older fixes, see PHNE_36596, PHNE_35705.
2.3 Defects fixed in previous releases for HP-UX11.23 11