HP AD278A and AD279A PCI Multiplexer Release Notes J6386-90009 (July 2011)

Table 3 Defects fixed
Defect DescriptionDefect ID
The pci_mux1 port hangs because of a lock mismatch. This defect is fixed
in the current release. Locks are synchronized and a function is added to
resolve the lock mismatch error.
QXCR1001099093
The PCI_MUX1 MTNOACTIVITY timeout displays time in seconds instead of
time in minutes. This defect is fixed in the current release. The code is modified
to ensure that the PCI_MUX1 MTNOACTIVITY time is displayed in minutes.
QXCR1001117855
The ch_callin and ch_callout variables display negative values. This
defect is fixed in the current release. The code is modified to ensure that the
QXCR1001134739
negative value error does not occur for the ch_callin and ch_callout
variables.
Interoperability information and installation requirements
This section provides information on interoperability, software, and hardware requirements for
installing the current version of the AD278A/AD279A PCI MUX product on HP-UX 11i v3.
Interoperability information
The non-RoHS (A6748A/A6749A) adapters and RoHS (AD278A/AD279A) PCI MUX adapters
can coexist on a system. The RoHS adapters cannot be connected to non-RoHS cables, connectors,
or port modules. The RoHS cables, connectors, or port modules cannot be connected to non-RoHS
adapters.
For more information about non-RoHS (A6748A/A6749A) and RoHS (AD278A/AD279A) RJ-45
connectors pin-out information, see the HP AD278A and AD279A PCI Multiplexer Support Guide.
Hardware requirements
Table 4 lists the platforms that support AD278A/AD279A PCI MUX serial adapters on HP-UX 11i
v3 systems.
Table 4 AD278A/AD279A PCI MUX Serial Adapters
ClassServer/Workstation
PA-RISCrp3410
PA-RISCrp3440
PA-RISCrp4440
PA-RISCrp7410
PA-RISCrp7420
Itanium-basedrx2620
Itanium-basedrx4640
Itanium-basedrx5670
Itanium-basedrx7620
Itanium-basedrx8620
For latest information about the platform support, see Support Matrix document at:
http://www.docs.hp.com/en/netcom.html#Multiplexers
6 Announcement