HP AD278A and AD279A PCI Multiplexer Release Notes, July 2010

Interoperability Information and Installation Requirements
This section provides interoperability, software, and hardware requirements information for
installing the current version of the AD278A/AD279A PCI MUX product on HP-UX 11i v1 and
HP-UX 11i v2.
Interoperability Information
The non-RoHS (A6748A/A6749A) adapters and RoHS (AD278A/AD279A) PCI MUX adapters
can coexist on a system. The RoHS adapters cannot be connected to non-RoHS cables, connectors,
or port modules. The RoHS cables, connectors, or port modules cannot be connected to non-RoHS
adapters.
For more information about non-RoHS (A6748A/A6749A) and RoHS (AD278A/AD279A) RJ-45
connectors pin-out information, see the HP AD278A and AD279A PCI Multiplexer Support Guide.
Hardware Requirements
Table 1-4 lists the platforms that support AD278A/AD279A PCI MUX serial adapters on HP-UX
11i v1 and HP-UX 11i v2 systems.
Table 1-4 AD278A/AD279A PCI MUX Serial Adapters
Supported PlatformClassServer/Workstation
HP-UX 11i v2HP-UX 11i v1
YesYesPA-RISCrp2470
YesYesPA-RISCrp3410
YesYesPA-RISCrp3440
YesYesPA-RISCrp4440
YesYesPA-RISCrp7410
YesYesPA-RISCrp7420
YesNoItanium-basedrx2620
YesNoItanium-basedrx4640
YesNoItanium-basedrx5670
YesNoItanium-basedrx7620
YesNoItanium-basedrx8620
NOTE: For latest information about the platform support, see Support Matrix document at:
http://www.hp.com/go/hpux-iocards-docs under Multiplexers category.
Software Requirements
The AD278A/AD279A PCI MUX serial adapters are supported on HP-UX 11i v1 (B.11.11), HP-UX
11i v2 (B.11.23), and HP-UX 11i v3 (B.11.31) operating systems.
Disk Space Requirement
The disk space required is 1.5 MB.
Interoperability Information and Installation Requirements 7