HP AD278A and AD279A PCI Multiplexer Support Guide, November 2008

1. Select Quit on the main menu.
2. Press Enter.
Driver Status Menu Selections
The Driver Status drop down menu displays the following selections:
• Driver Status
• Board Status
• Counters
• Topology
Figure 2-1 shows the Driver Status selection.
Figure 2-1 pmux_diag utility Driver Status main menu
NOTE: The pmux_diag utility version number is of the form B.x.xxxx
Where:
x - represents the release number, for example, 11.31.
xxxx - represents the AR release number or the version number for a Web release or OS initial
release.The AR release number can be 0609, 0612, and so on. The version number for a Web
release or OS initial release can be 01, 02, and so on.
Driver Status
The Driver Status sub-menu enables you to view the device driver version. The Driver Status
sub-menu is enabled by default. To view the version of the device driver, press Enter.
Figure 2-2 shows the device driver version.
16 Troubleshooting