HP AD279A PCI 64-Port Serial Multiplexer Installation Guide, February 2007

HP PCI 64-Port Serial Multiplexer Adapter Installation
HP AD279A PCI MUX 64-Port Adapter Installation Prerequisites
Chapter 1
5
Step 3. Attach auxiliary power supplies to third and fourth port modules, and plug power supplies into AC
receptacles. The power supply requires 110-220 V and 50-60 W AC input.
Connecting Port Modules to the AD279A PCI MUX 64-Port Adapter
A port module (DB-25 and RJ-45) is an interface between the AD279A PCI MUX 64-port adapter and the
RS-232 peripheral device. The module is connected to the adapter, as shown in Figure 1-2.
Figure 1-2 Port Modules Connected to the Adapter
Hardware Requirements
Table 1-1 lists servers that support AD279A PCI MUX 64-port adapter on HP-UX 11i v3.
Table 1-1 AD279A PCI MUX 64-Port Server Support
Server/Workstat
ion
Class
Number of
AD279A PCI
MUX 64-Port
Adapters
Supported
rp3410 PA-RISC 2
rp3440 PA-RISC 3
rp4440 PA-RISC 6
rp7410 PA-RISC 15
rp7420 PA-RISC 15
rx2620 Itanium-based 3
rx4640 Itanium-based 6
rx5670 Itanium-based 4
rx7620 Itanium-based 15
rx8620 Itanium-based 16