HP AD279A PCI 64-Port Serial Multiplexer Installation Guide, February 2007

HP PCI 64-Port Serial Multiplexer Adapter Installation
HP AD279A PCI MUX 64-Port Adapter Installation Prerequisites
Chapter 1
6
NOTE For latest information about the platform support, see Support Matrix document at:
http://www.docs.hp.com/en/netcom.html#Multiplexers
Slot Limitations
Table 1-2 lists the slot limitations on the following servers:
Software Requirements
The AD279A PCI MUX 64-port adapter is supported on HP-UX 11i v1, HP-UX 11i v2, and HP-UX 11i v3
operating systems. To find out the version of the operating system installed on your system, run the following
command at the command prompt:
$ uname -r
If HP-UX 11i v3 is installed on your system, the following output is displayed:
B.11.31
Table 1-2 Server Slot Limitations
Server/Workstation
AD279A PCI MUX 64-Port
Adapter not Supported on
rp3410 Slot 4
rp3440 Slot 4
rx2620 Slot 4