HP-HSC ATM/622 & ATM/155 Adapters Hardware Installation Guide

15
HP 9000 K-Class systems
2
6 Unscrew the two retaining screws of the host board.
7 Remove the host board from the system.
8 Put the two hooks on the face plate of the ATM adapter into the slots on the face
plate of the host board and press the connector firmly into the socket on the host
board.
9 Screw the two face plates together.
10 CAREFULLY and SLOWLY replace the host board in the system.
11 Fasten the host board in place using the two retaining hooks, and replace the two
screws.
➀
➁