HP PCI Multiplexer Family Cabling, Diagnostics, and Troubleshooting Manual

Install Port Modules, Fan Out Cable & Power Supply
Install Fan Out Cable
Chapter 340
Install Fan Out Cable
Install the fan out cable (J2482-60013) by connecting the DB-78
connector to the installed HP PCI MUX 8-port Card (Figure 3-6).
If you are installing a Fan-out Cable on the SuperDome platform, use of
a 12-foot cable, Part Number A6748-63001, is required. This will require
removing the back panel of the SuperDome as well as removing the
panel from the cable management device in order to install the RJ-45
connectors through the cable management system.
Figure 3-6 Install Fan-out Cables