HP PCI Multiplexer Family Cabling, Diagnostics, and Troubleshooting Manual

Troubleshooting and Diagnostics
Troubleshooting
Chapter 6 73
˜.
5. You should be back at your HP-UX prompt.
6. See the SAM manual for specific details on how to set up your
modem for dial-in calls on HP-UX 11i v1 and 11i v2 systems.
NOTE System Administration Manager (SAM) is deprecated in HP-UX 11i
v3. HP System Management Homepage (HP SMH) is the system
administration tool for managing HP-UX 11i. SMH provides
web-based systems management functionality, at-a-glance
monitoring of system component health and consolidated log
viewing. SMH also provides Terminal User Interfaces (TUIs).
Modem Error Messages
Below are listed common modem error messages displayed when using
the cu command:
Error Message:
NO DEVICES AVAILABLE
Probable Cause:
The /usr/lib/uucp/devices file is not setup correctly.
Error Message:
DEVICE LOCKED
Probable Cause:
A lock file exists in the /usr/spool/uucp directory. If no one else is using
the modem, remove the lock file and try again.
Error Message:
CAN’T ACCESS DEVICE
Probable Cause:
The dial-out port cannot be opened. Check the /dev directory for the
port’s existence, ownership and permissions.